Product ID:POLY, 113/C
MSDS Date:10/01/1991
FSC:6810
NIIN:00N048557
MSDS Number: BVCJP

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Telephone: 716-265-0413

Cage: 0MWG0

ETHYL METHACRYLATE HOMOPOLYMER; (POLY(ETHYL METHACRYLATE)).

CAS: 9003-42-3

Fraction By Weight: 100%

OSHA PEL SEE INGREDIENT NAME

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT MAY CAUSE DISCOMFORT OR
RASH; POSSIBLY ALLERGIC SKIN RASHES. EYE IRRITATION WITH
DISCOMFORT, TEARING OR BLURRED VISION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, GIVE
MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN:
WASH WITH SOAP AN D WATER. REMOVE CONTAMINATED CLOTHING. INGEST:
GET MD IMMEDIATELY .

Flash Point:572F,300C
Extinguishing Media:CHEMICAL FOAM, CO*2, FOG, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:SWEEP UP AND COLLECT IN SUITABLE CONTAINER FOR
DISPOSAL. CAUTION: POLYETHYLENE PELLETS ON FLOORS ARE SLIPPERY AND
CAN CAUSE FALLS AND INJURIES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A DRY PLACE. KEEP CONTAINERS
CLOSED TO PREVENT CONTAMINATION. OPEN CONTAINERS ONLY IN
WELL-VENTILATED AREA.
Other Precautions:NOTE: THIS MATERIAL IS INTENDED FOR LABORATORY USE
ONLY. IT IS NOT SOLD OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.

Respiratory Protection:IF NEEDED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED SAFETY GOGGLES .
Other Protective Equipment:EYEBATH AND/OR SAFETY SHOWER WHICH MEET ANSI
DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Solubility in Water:NIL
Appearance and Odor:SMALL ROUND BEADS, NO ODOR.
Percent Volatiles by Volume:<1.0

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES ABOVE 570F.
Hazardous Decomposition Products:CO

Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.